ksd-s0n001-000 1 SCT04N60E triac 600v, 4a standard triac this device is suitable for low power ac switching application, phase control application such as fan speed and temperature modulation control, lighting control and static switching relay. features y repetitive peak off-state voltage : v drm =600v y r.m.s on-state current : i t(rms) =4a y high commutation: (di/dt) c =3.7 a/ ? (min) applications y switching mode power supply, light dimmet y tv sets, stereo, refrigerator, washing machine y electric blanket, solenoid driver, small motor control y photo copier, electric tool ordering information device marking code package packaging SCT04N60E sct04n60 to-126 tube absolute maximum ratings (limiting values) characteristic symbol value unit repetitive peak off-state voltage v drm 600 v rms on-state current (full sine wave) i t(rms) 4 a non- repetitive surge peak on-state current (full cycle, tj initial = 25 ) i tsm 38 a i 2 t value for fusing i 2 t 6 a 2 s peak gate current i gm 4 a peak gate power dissipation p gm 5 w average gate peak dissipation p g(av) 0.5 w storage temperature range t stg -40 to +150 operating junction temperature range t j -40 to +125 column 1 - auk : auk logo - yww : year & week code column 2 : device code product characteristics symbol rating i t(rms) 4a v drm 600v to-126 1 2 3 marking diagram auk yww sct04n60
ksd-s0n001-000 2 thermal characteristics characteristic symbol value unit maximum thermal resistance junction to case (ac) r th(j-c) 5.2 /w maximum thermal resistance junction to ambient (ac) r th(j-a) 80 /w electrical characteristics (t j =25 , unless otherwise specified) off characteristics characteristic symbol test condition min. typ. max. unit repetitive peak off-state current i drm v d = v drm - - 5 ua repetitive peak reverse current i rrm v r = v rrm - - 5 a on characteristics characteristic symbol test condition min. typ. max. unit peak on-state voltage v tm i t = 5.5a - - 1.55 v holding current i h v d = 12v, i t = 0.2a - - 40 ma gate trigger current i gt ( - - ) v d = 12v, r l = 30 ? - - 30 ma i gt ( ) - - - - ma gate trigger voltage v gt ( - - ) v d = 12v, r l = 30 ? - - 1.3 v gate non-trigger voltage v gd v d = 2/3 v drm , t j =125 0.2 - - v dynamic characteristics characteristic symbol test condition min. typ. max. unit critical rate of rise of off-state voltage (dv/dt) s v d = 2/3 v drm , t j =125 200 - - v/ s rate of change of commutation current (di/dt) c (dv/dt) c =10v/ ? , t j =125 3.7 - - a/ ? critical rate of rise of on-state current di/dt f=120hz, i g = 2 i gt t r 100 ? , t j =125 - - 50 a/ s SCT04N60E simple circuit for (dv/dt) s simple circuit for (di/dt) c vs (dv/dt) c simple circuit for di/dt
ksd-s0n001-000 3 electrical characteristic curves ? ? ? w fig. 6 i t - i gt fig. 1 p ? i t(rms) fig. 4 (di/dt) c - (dv/dt) c fig. 2 i t ( rms ) ? t c fig. 5 i gt- t j fig. 3 i t - v t a ? ? SCT04N60E a
ksd-s0n001-000 4 SCT04N60E electrical characteristic curve s fig. 8 i t - v gt fig. 7 v gt- t j ? ? fig. 9 i h- v t
ksd-s0n001-000 5 outline dimension unit : mm SCT04N60E
ksd-s0n001-000 6 SCT04N60E the auk corp. products are intended for the use as components in general electronic equipment (office and communication e quipment, measuring equipment, home appliance, etc.). please make sure that you consult with us before you use these auk corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safet y device, etc.). auk corp. cannot accept liability to any damage which may occur in case these auk corp. products were used in the mentioned equi pments without prior consultation with auk corp.. specifications mentioned in this publicati on are subject to change without notice.
|
